1985 CB650SC DOHC USA forks

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

User avatar
Blacksasquatch
Posts: 2
Joined: Tue Jul 04, 2017 8:30 am

1985 CB650SC DOHC USA forks

Postby Blacksasquatch » Sun Jul 16, 2017 2:45 pm

Hi there I can't seem to find a manual for this Bike so here goes.
I'm about to replace the fork seals on this but I've noticed that it has air valves. Never had to work on these before and I might sound a bit thick but what do I pump into them? Is it just pump it like a tire or something else?
What psi do I put in?
Sorry again if these are silly questions.
Cheers in advance
Sorry officer

cb650
Posts: 2900
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: 1985 CB650SC DOHC USA forks

Postby cb650 » Sun Jul 16, 2017 4:46 pm

they usually take very little pressure. 8 to 12 lbs. a tire pump is best to keep from blowing them out
Did you clean the tank out?!?!?!?!

User avatar
Blacksasquatch
Posts: 2
Joined: Tue Jul 04, 2017 8:30 am

Re: 1985 CB650SC DOHC USA forks

Postby Blacksasquatch » Wed Jul 19, 2017 8:35 am

Cheers for that.
Anyone able to tell me how much oil to put in so far searching online gives me different quantities.
Thanx in advance
Sorry officer


Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 12 guests