Parting Out: 1982 Honda CB650

Get some new gear

Moderators: Volker_P, tidd650

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Parting Out: 1982 Honda CB650

Postby witttom » Sun Sep 30, 2012 11:09 pm

Many of you are familiar with my 80CB650C thread. I've sold LOTS of those parts. I have now acquired a 1982 Honda CB650 (Standard, Non-Custom) that I will be parting out.

ImageImage

This bike is pretty much complete. Carbs are removed. I do not know it's history, but I'm assuming it's not running because... well, the carbs are removed (it probably needed a carb cleaning, and a previous owner didn't know what they were doing). Title has since been lost, which makes it a parts bike. I have the carbs, but the float bowls have been removed. I need to inspect them to see what condition they're really in. I also have the original chrome headlight bucket (photos above show a Vetter headlight rigged up). Front wheel is a 19". Rear wheel is a 17".

FAQ's:
Seat is in good shape, and has no rips.
I have all the electronics.
Brakes work well.
Tank appears to be solid with no noticeable dents, but does have exterior scratches and rust on the inside.
Both side covers in good shape.
Tail light lens has a crack.

I will be breaking this bike down over the coming days, photographing individual pieces, and selling everything. Let me know what you need. I will be updating this thread with a list of parts that have sold. It is fairly common for me to ship parts out the following day after receiving a PayPal payment, but sometimes it takes me two or three.

I will answer PM's, but if you have an interest or questions about specific parts, it's usually best (and quicker) if you email me directly at witttom@yahoo.com (three T-s in w-i-t-t-t-o-m).


These items have sold (or are not available):
Charging Rotor
Camshaft
Tach Drive Gear
Exhaust
Front Master Cylinder
Ignitors/ECU
Solenoid
Front 19" Wheel
Rear 17" Wheel w/ Sprocket Carrier and Sprocket
Fuel Tank
Side Covers
LH Controls
Seat
Front fender
Front axle
Clutch Lever and Perch/Mount
Coils & Spark Plug Wires
Speedo Cable
Speedo Drive Hub
Lock set (ignition switch, gas cap, helmet lock, key)
Gear shift pedal (although I have others)
Pulse generator has sold (I have others)
Last edited by witttom on Thu Jun 13, 2013 8:16 am, edited 14 times in total.
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

cb650
Posts: 2901
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Parting Out: 1982 Honda CB650

Postby cb650 » Mon Oct 01, 2012 9:16 am

Whats the inside of the tank like? And the bottom seams?
Did you clean the tank out?!?!?!?!

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Re: Parting Out: 1982 Honda CB650

Postby witttom » Mon Oct 01, 2012 10:09 am

cb650 wrote:Whats the inside of the tank like? And the bottom seams?


Bottom seams appear to be in good shape. The tank does not appear to be rusted out anywhere. There IS rust inside the tank though. I would not consider it severe, but but bad enough that I would not attempt to use it without treating it. The tank did not have any fuel in it when I got it. The more I shake it around and try to dump out the rust flakes, I think the more it flakes.

Image
Image
Image
Image
Image
Image
Image
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

cb650
Posts: 2901
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Parting Out: 1982 Honda CB650

Postby cb650 » Tue Oct 02, 2012 12:24 pm

Given its crappy condition pm me with a price + sidecovers.
Did you clean the tank out?!?!?!?!

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Re: Parting Out: 1982 Honda CB650

Postby witttom » Fri Oct 05, 2012 8:54 pm

cb650 wrote:Given its crappy condition pm me with a price + sidecovers.


PM sent. Apologies for the delay.
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Re: Parting Out: 1982 Honda CB650

Postby witttom » Thu Oct 11, 2012 10:45 am

witttom wrote:A local friend has dibs on the cam. If he doesn't buy it, it will be available too.


My local buyer has decided that he does not want to tear into his 550 to swap out cams. So, this cam is now available. I have had a lot of inquiries here on SOHC as well as the CB650 forums, as a result of me parting out this 82CB650 as well as parting out my 80CB650C. I'm honestly not sure who inquired about it first (some inquires where months ago).

It is showing some wear, but not terrible. Looks normal IMHO with a bike that has 40k on it. I'd like $100 out of it, plus shipping.

ImageImage
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

onepieceatatime
Posts: 322
Joined: Wed Nov 02, 2011 5:12 am
Location: Franklin County, Pennsylvania, USA

Re: Parting Out: 1982 Honda CB650

Postby onepieceatatime » Thu Oct 11, 2012 12:40 pm

You will probably want to throw the tach drive gear in with the cam. That is also needed for the swap.
Folsoml wrote: Good judgement comes from experience. Experience comes from bad judgement. :lol:

cb650
Posts: 2901
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Parting Out: 1982 Honda CB650

Postby cb650 » Thu Oct 11, 2012 2:09 pm

And tack.
Did you clean the tank out?!?!?!?!

onepieceatatime
Posts: 322
Joined: Wed Nov 02, 2011 5:12 am
Location: Franklin County, Pennsylvania, USA

Re: Parting Out: 1982 Honda CB650

Postby onepieceatatime » Thu Oct 11, 2012 2:22 pm

cb650 wrote:And tack.

Tachs are easier to find though than the cams and tach drive gears. The Cb750 tachs work, and look more like the 550 tach. Its what I would use if I was going to do a swap.
Folsoml wrote: Good judgement comes from experience. Experience comes from bad judgement. :lol:

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Re: Parting Out: 1982 Honda CB650

Postby witttom » Sun Oct 14, 2012 8:42 pm

onepieceatatime wrote:You will probably want to throw the tach drive gear in with the cam. That is also needed for the swap.

I will include the tach drive gear as well.
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Re: Parting Out: 1982 Honda CB650

Postby witttom » Tue Oct 16, 2012 11:52 am

Charging rotor, right-side exhaust, camshaft and tach drive gear have sold.
Last edited by witttom on Fri Oct 19, 2012 7:31 am, edited 1 time in total.
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

tfraysie
Posts: 2
Joined: Wed Oct 17, 2012 10:34 am

Re: Parting Out: 1982 Honda CB650

Postby tfraysie » Wed Oct 17, 2012 3:24 pm

If this will fit a 79 cb650, how much for the exhuast setup and what condition is it in? Thanks.

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Re: Parting Out: 1982 Honda CB650

Postby witttom » Wed Oct 17, 2012 4:07 pm

tfraysie wrote:If this will fit a 79 cb650, how much for the exhuast setup and what condition is it in? Thanks.

Right side exhaust/muffler/header has already sold. I only have the left exhaust/muffler/header and two center headers remaining. If you're interested in any of these remaining pieces (I'm assuming you need the whole setup) please feel free to let me know.
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

User avatar
witttom
Posts: 254
Joined: Tue Feb 28, 2012 3:23 pm
Location: Southwestern Ohio
Contact:

Re: Parting Out: 1982 Honda CB650

Postby witttom » Fri Oct 19, 2012 7:24 am

Recently sold....
- Left-side exhaust
- Ignitors/ECU
Tom Witt
06TriumphT709EN 98MZBaghira 86HondaCH250 83 HondaCB650SC 81SuzukiGS750Cafe
Image
Graveyard Parts:
Honda 79CB650 80CB650 80CB650C 81CB650 82CB650 82CB450SC
Suzuki GS650 GS750 GS850

Dick_ocho
Posts: 3
Joined: Sun Oct 21, 2012 9:48 pm

Re: Parting Out: 1982 Honda CB650

Postby Dick_ocho » Sun Oct 21, 2012 10:03 pm

do you have the speedo cable and hub?


Return to “Accessories and Apparel”

Who is online

Users browsing this forum: No registered users and 2 guests