Wanted intact starter/kill switch assembly for 83 CB650SC

Get some new gear

Moderators: Volker_P, tidd650

premiumroast
Posts: 27
Joined: Fri Aug 23, 2013 4:21 pm

Wanted intact starter/kill switch assembly for 83 CB650SC

Postby premiumroast » Mon Aug 26, 2013 1:38 pm

Looking for a starter/kill switch assembly for my 83 Nighthawk. Apparently the wiring is unique to this model year? Anyone who has one please let me know! Thanks!!!

usbear
Posts: 361
Joined: Sun Mar 10, 2013 9:55 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby usbear » Mon Aug 26, 2013 2:46 pm

I have three complete wiring harnesses and two or three kill switch and at least one throttle and kill switch. Pm me with email and I will send my email address. Where are you located?

cb650
Posts: 2901
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby cb650 » Tue Aug 27, 2013 4:53 am

If those dont work I have on off a 84. 83 should be a DOHC.
Did you clean the tank out?!?!?!?!

usbear
Posts: 361
Joined: Sun Mar 10, 2013 9:55 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby usbear » Tue Aug 27, 2013 11:00 am

cb650 :
If yours are known to be correct then go with those.

Premiumroast :
Check with Cb650 as he has correct one. While we are at it I would like pics to ID mine. (pics of 83)

I have a 84 and 85 650sc bikes and bunch of spares for them as well as 83 spares.
I have a Prepped crank: Lightened by 5lbs, turned, trued, balanced and balanced rods set for it. Rods have bearings for that crank. Sell for 350 w/rods if u know any one.
Thanks
Bob

premiumroast
Posts: 27
Joined: Fri Aug 23, 2013 4:21 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby premiumroast » Tue Aug 27, 2013 10:30 pm

cb650: I'm located in Manitoba Canada and if you have an intact throttle/kill switch assembly i'd be interested. I am currently starting the bike by contacting the starter wires, far from a perfect method! Bike is also only running on two outside cylinders but I suspect it is a carb issue as the choked rod is bent, and the two inside cylinders are being fed pure gasoline.

premiumroast
Posts: 27
Joined: Fri Aug 23, 2013 4:21 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby premiumroast » Tue Aug 27, 2013 10:32 pm

usbear: thanks for the info! I was given the bike when I sold my 09 BMW G650, and have been living by the adage "having an older bike makes you a better mechanic" haha

usbear
Posts: 361
Joined: Sun Mar 10, 2013 9:55 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby usbear » Wed Aug 28, 2013 7:11 pm

I like it!
Good Luck!
Keep posted.

cb650
Posts: 2901
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby cb650 » Thu Aug 29, 2013 8:20 pm

premiumroast wrote:cb650: I'm located in Manitoba Canada and if you have an intact throttle/kill switch assembly i'd be interested. I am currently starting the bike by contacting the starter wires, far from a perfect method! Bike is also only running on two outside cylinders but I suspect it is a carb issue as the choked rod is bent, and the two inside cylinders are being fed pure gasoline.



I'll double check it and get back to you. send me a pm or email cb650@juno.com
Did you clean the tank out?!?!?!?!

premiumroast
Posts: 27
Joined: Fri Aug 23, 2013 4:21 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby premiumroast » Sun Sep 01, 2013 8:52 pm

cb650: Thanks, appreciate it! Got the carbs cleaned and tuned for $40. Picking them up on Tuesday!

premiumroast
Posts: 27
Joined: Fri Aug 23, 2013 4:21 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby premiumroast » Tue Sep 03, 2013 7:04 pm

Do you have any idea if the starter/kill switch off an 84 Honda Nighthawk would work on my bike??

usbear
Posts: 361
Joined: Sun Mar 10, 2013 9:55 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby usbear » Wed Sep 04, 2013 12:35 am

Well first of all it is the connector that matters and you can change that.So when cb650 gets back to you should be not much problem.

Take a close up pic of the electrical plug in. (Connectors)

premiumroast
Posts: 27
Joined: Fri Aug 23, 2013 4:21 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby premiumroast » Wed Sep 04, 2013 8:08 am

usbear actually the bike mechanic who cleaned and tuned the carbs has a fully intact starter and kill switch assembly off an 84 Nighthawk 750 for like $35 Canadian so I might buy it from him, just want to make sure it is going to fit up properly.

usbear
Posts: 361
Joined: Sun Mar 10, 2013 9:55 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby usbear » Wed Sep 04, 2013 12:45 pm

ok no worries

premiumroast
Posts: 27
Joined: Fri Aug 23, 2013 4:21 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby premiumroast » Thu Sep 05, 2013 4:17 pm

carbs on, but outside right cylinder and inside left cylinder not running. Discovered the inside left cylinder plug wire was broken inside. I think I might have plugs/coils mixed up.

usbear
Posts: 361
Joined: Sun Mar 10, 2013 9:55 pm

Re: Wanted intact starter/kill switch assembly for 83 CB650S

Postby usbear » Thu Sep 05, 2013 4:30 pm

Left Coil = 1 and 4 Outside
Right Coil = 2 and 3 Inside


Return to “Accessories and Apparel”

Who is online

Users browsing this forum: No registered users and 3 guests